Lenovo ThinkServer 1045 - Accessing the Adapter Properties Window

Table27.ItemsintheAdapterListwindow(continued)
ItemDescription
FWRevision
Thecurrentrmwareversion
Status
Indicatingwhethertheadapteronthebootlistisenabled
ordisabled
BootOrder
Indicatingthebootsequence.Youcanchangethe
sequencebypressing+or-.
YoucanpressAlt+NtoswitchtotheGlobalPropertieswindowtosetthepropertiesofbootandinterrupt.
Table28.ItemsontheGlobalPropertieswindow
ItemDescription
PauseWhenBootAlertDisplayedIndicatingwhethertostopthebootwhenthealertoccurs
duringtheboot.Thecurrentpropertycanbechangedby
pressing+or-.
No:Selectthisoptionifyouwanttocontinuetoboot
whenthealertoccurs.
Yes:Selectthisoptionifyouwanttopausetheboot
whenthealertoccursandthenyoucanpressanykey
tocontinue.
BootInformationDisplayMode
DeningwhatwillbedisplayedintheBIOSinterface
duringtheboot.Thecurrentpropertycanbechangedby
pressing+or-.
SupportInterrupt
Indicatingthesupportedinterruptmode.Hookinterrupt,
theDefaultisthedefaultvalue,whichsupportsbooting
fromCD-ROMinoppyemulationmode.
RestoreDefaultsRestoringdefaultsettings
AccessingtheAdapterPropertieswindow
IntheAdapterListwindow,selectC1068EandpressEnter.TheAdapterPropertieswindowforSAS1068E
opens.
Table29.ItemsintheAdapterPropertieswindowforSAS1068E
ItemDescription
Adapter
TheSASadapter(s)detected
PCISlotThePCIslotnumberassignedtotheadapter
PCIAddress(Bus/Dev)ThePCIdeviceorfunctionassignedtotheadapter
MPTFirmwareRevision
Thecurrentrmwareversion
SASAddressThecurrentSASaddress
Status
Indicatingwhethertheadapteronthebootlistisenabled
ordisabled
BootOrder
Indicatingthebootsequence
Chapter6.Conguringtheserver85