v Automatic memory downsizing on error detection
v Automatic restart on non-maskable interrupt (NMI)
v Availability of microcode level
v Built-in, menu-driven setup, system configuration, and RAID configuration
v Built-in monitoring for fan, temperature, and voltage
v Cooling fans with speed-sensing capability
v ECC DDR3 SDRAM with Serial Presence Detect (SPD)
v Error codes and messages to help you identify problems
v Generating error logs for the power-on self-test (POST) failures
v Hot-swap SAS hard disk drives
v Integrated Ethernet controllers
v Intelligent Platform Management Interface (IPMI) 2.0
v Power-on self-test (POST)
v Redundant Ethernet connection with failover capability (requires an optional
Ethernet card)
v Standby voltage for system-management features and monitoring
v System-error light-emitting diode (LED) on the front panel
v Vital product data (VPD), including the serial number information and
replacement part numbers, stored in the nonvolatile memory for easier remote
maintenance
10 Installation and User Guide
To Next Page
Loading...
