Table 27. Items in the Adapter List window (continued)
Item Description
PCI Bus The PCI bus number assigned for the
adapter.
Dev/Fnc The PCI Device/Function assigned for the
adapter.
FW Revision Indicates the current Firmware version.
Status Indicates that the adapter in the boot list is
enabled or disabled.
Boot Order Indicates the boot sequence. You can change
the sequence by pressing + or -.
You can press Alt+N to switch to the Global Properties window to set the
properties of boot and interrupt.
Table 28. Items on the Global Properties window
Item Description
Pause When Boot Alert Displayed Indicates stop the boot or not when the alert
occurs during the boot. The current property
can be changed by pressing + or -. The
option No indicates that you can continue to
boot when the alert occurs. The option Yes
indicates that you can pause boot when the
alert occurs and press any key to continue.
Boot Information Display Mode Defines how much BIOS information to be
displayed during the boot. The current
property can be changed by pressing + or -.
Support Interrupt Indicates the supported interrupt mode.
Hook interrupt, the Default is the default
value, which supports the boot from
CD-ROM in the floppy emulation mode.
Restore Defaults Restores the defaults.
Accessing the Adapter Properties window
In the Adapter List window, select C1068E and press Enter. The Adapter Properties
window for SAS1068E opens.
Table 29. Items in the Adapter Properties window for SAS1068E
Item Description
Adapter Detected SAS adapter.
PCI Slot The PCI slot number assigned for the
adapter.
PCI Address (Bus/Dev) The PCI Device/Function assigned for the
adapter.
MPT Firmware Revision Indicates the current Firmware version.
SAS Address Indicates the current SAS address.
Status Indicates that the adapter in the boot list is
enabled or disabled.
Boot Order Indicates the boot sequence.
Chapter 6. Configuring the server 85
To Next Page
Loading...
