Chapter 5. Installing, removing, or replacing hardware
This chapter provides instructions on how to install, remove, or replace hardware
for your server.
This chapter contains the following topics:
v “Guidelines”
v “Removing the server cover” on page 21
v “Installing, removing, or replacing optional hardware devices” on page 22
v “Installing, removing, or replacing hardware devices” on page 43
v “Completing the parts replacement” on page 67
Guidelines
This section provides some guidelines that you should read and understand before
using your server.
Basic guidelines
Before you use the server, be sure to read and understand the following guidelines:
v Be sure to read and understand the Safety Information and the Warranty and
Support Information on the ThinkServer Documentation DVD that comes with your
product, and “Guidelines.” These information will help you work safely. To
obtain a copy of the publications, go to:
http://www.lenovo.com/support
v When you install your new server, take the opportunity to download and apply
the most recent firmware updates. This step will help you to ensure that any
known issues are addressed and the server is ready to function at optimal
performance. To download firmware updates for your server, do the following:
1. Go to http://www.lenovo.com/support.
2. Click Download & Drivers → ThinkServer and then follow the instructions
on the Web page to download firmware updates for your server.
v Observe good housekeeping in the area where you are working. Put removed
covers and other parts in a safe place.
v If you must turn on the server while the server cover is removed, make sure
that no one is near the server and that no tools or other objects have been left
inside the server.
v Do not attempt to lift an object that you think is too heavy for you. If you have
to lift a heavy object, observe the following precautions:
– Make sure that you can stand safely without slipping.
– Distribute the weight of the object equally between your feet.
– Use a slow lifting force. Never move suddenly or twist when you lift a heavy
object.
– To avoid straining the muscles in your back, lift by standing or by pushing
up with your leg muscles.
v Make sure that you have an adequate number of properly grounded electrical
outlets for the server, monitor, and other devices.
v Back up all important data before you make changes to drives.
© Copyright Lenovo 2010 19
To Next Page
Loading...
