Notes:
•IfyouremovetheTMMPremium,theiKVMfunctionforserverremotemanagementwillbeunavailable.
•UseanydocumentationthatcomeswiththeTMMPremiumandfollowthoseinstructionsinadditionto
theinstructionsinthistopic.
•Dependingonthemodel,yourservermightlookslightlydifferentfromtheillustrationinthistopic.
ToremovetheTMMPremium,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Iftheserverisinstalledinarackcabinet,removetheserverfromtherackcabinetandplaceitonaflat,
clean,andstatic-protectivesurface.SeetheRackInstallationInstructionsthatcomeswiththeserver.
3.Removetheservercover.See“Removingtheservercover”onpage89.
4.LocatetheTMMPremiumconnectoronthesystemboardandthenlifttheTMMPremiumstraight
uptoremoveitfromtheconnector.
Figure82.RemovingtheTMMPremium
5.IfyouareinstructedtoreturntheoldTMMPremium,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Chapter6.Installing,removing,orreplacinghardware131
To Next Page
Loading...
