Function Caretaker node
2
Other nodes
PSU firmware update
3
✔ X
Virtual reseat/reset for all nodes in
the chassis
✔ X
View PSU inventory and events
✔ X
View chassis VPD and PSoC
firmware versions
✔ ✔
View PSU present status
✔ ✔
View information of chassis and all
nodes
✔ ✔
Virtual reseat / reset for the current
node itself
✔ ✔
View the change history of the
caretaker node
✔ ✔
View the history of node installation /
removal
✔ ✔
View or participate in the caretaker
node selection
✔ ✔
Node feature
Your node implements the following features and technologies:
• Features on Demand
If a Features on Demand feature is integrated in the system or in an optional device that is installed in the
system, you can purchase an activation key to activate the feature. For information about Features on
Demand, see:
https://fod.lenovo.com/lkms
Intel
®
On Demand is a feature that allows user to customize processor capabilities according to workload
and tasks at hand. For more information, see
“Enable Intel
®
On Demand” on page 193.
• Lenovo XClarity Controller (XCC)
The Lenovo XClarity Controller is the common management controller for Lenovo ThinkSystem server
hardware. The Lenovo XClarity Controller consolidates multiple management functions in a single chip on
the server system board. Some of the features that are unique to the Lenovo XClarity Controller are
enhanced performance, higher-resolution remote video, and expanded security options.
The system supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo
XClarity Controller 2 (XCC2), refer to
https://pubs.lenovo.com/lxcc-overview/.
• UEFI-compliant server firmware
Lenovo ThinkSystem firmware is Unified Extensible Firmware Interface (UEFI) compliant. UEFI replaces
BIOS and defines a standard interface between the operating system, platform firmware, and external
devices.
2
ThinkSystem SD530 V3 User Guide
2. By default, the caretaker node is automatically selected by the PSoC firmware on the chassis midplane, unless
otherwise designated.
3. The update of PSU firmware might or might not be available. When it is available, only the caretaker node can
perform this update.
To Next Page
Loading...
