To remove the chassis air baffle, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=
PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
.
Figure 56. Chassis air baffle removal
Table 76. Chassis air baffle release latch
1 Release latches
Step 1. Press the chassis air baffle release latches; then, lift the chassis air baffle out from the server.
Note: For proper cooling and airflow, reinstall the chassis air baffle before you install the server
into the rack. Operating the server with the chassis air baffle removed might damage server
components.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove the system board air baffle and the power interposer
Use this procedure to remove the system board air baffle and the power interposer.
Note: If the server comes with a processor and memory expansion tray, it does not come with this
component.
Before removing the system board air baffle, complete the following steps:
94
ThinkSystem SR860 Setup Guide
To Next Page
Loading...
