Lenovo ThinkSystem SR860 - Install the Pcie Expansion Tray

1. Install the top cover (see “Install the top cover” on page 128).
2. If the server is installed in a rack, reinstall the server into the rack.
3. Power on the server and any peripheral devices.
Install the PCIe expansion tray
Use this procedure to install the PCIe expansion tray.
Before installing a PCIe expansion tray:
1. Read the safety information and installation guidelines (see
“Safety” on page iii and “Installation
Guidelines” on page 56
).
To install the PCIe expansion tray, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=
PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
.
Step 1. Grasp the handle with one of your hands, with the other hand grasping the PCIe expansion tray lift
point; then, carefully lower the tray into the server. Make sure the four posts on the sides are
inserted into the alignment slots on the chassis.
124
ThinkSystem SR860 Setup Guide