Front operator panel with LCD display
The following section includes an overview of the LCD system information display panel of front operator
panel, which displays various types of information about the server.
Depends on the configuration, your front operator panel may come with a LCD display, which is accessible
with a pull on the latch on the right of the front operator panel.
Figure 7. Front operator panel and LCD display
The LCD system information display panel attached to the front of the server allows quick access to system
status, firmware, network, and health information.
Figure 8. System information and control of the front operator panel
Table 5. System information and control of the front operator panel
1 System information:
System information, including system name, system
status, temperature, power consumption and UEFI/POST
code, is displayed here.
3 Select button:
Press this button to make your selection from the menu
options.
2 Scroll up button:
Press this button to scroll up or scroll to the left in the
main menu to locate and select the system information
that you want displayed.
4 Scroll down button:
Press this button to scroll down or scroll to the right in the
main menu to location and select the system information
that you want displayed.
Following is an example of the information on the display panel.
Chapter 2. Server components 17
To Next Page
Loading...
