2.5-inch AnyBay (SATA/SAS/NVMe) 8-bay backplane
Figure 20. 2.5-inch AnyBay (SATA/SAS/NVMe) 8-bay backplane
Table 16. Connectors on 2.5-inch AnyBay (SATA/SAS/NVMe) 8-bay backplane
1 SATA/SAS/NVMe connector 3 5 SATA/SAS connector 1
2 SATA/SAS/NVMe connector 2 6 SATA/SAS connector 0
3 SATA/SAS/NVMe connector 1 7 Power/configuration cable connector
4 SATA/SAS/NVMe connector 0 8 Cable numbering labels
2.5-inch AnyBay (SATA/SAS/NVMe) 8-bay backplane comes with:
• Four SATA/SAS drive connectors with bay numbers of 0-3 or 8-11, depending on the location installed.
• Four NVMe drive connectors with bay numbers of 4-7 or 12-15, depending on the location installed.
• One power/configuration cable connector
• Two SATA/SAS connectors (0, 1)
• Four NVMe connectors (0, 1, 2, 3)
RAID adapters
Use this information to locate the connectors on the optional RAID adapters.
Figure 21. Connectors on SATA/SAS RAID adapter (8i)
Table 17. SATA/SAS RAID adapter (8i)
1 SATA/SAS RAID adapter (8i) with two SATA/SAS connectors (C0, C1)
Chapter 2. Server components 29
To Next Page
Loading...
