Figure 91. PCIe expansion tray installation
After installing the PCIe expansion tray, complete the following steps:
1. Install the 4U PCIe riser assemblies (see “Install a 4U PCIe riser assembly” on page 126).
2. Install the top cover (see
“Install the top cover” on page 128).
3. If the server is installed in a rack, reinstall the server into the rack.
4. Power on the server and any peripheral devices.
Install a 4U PCIe riser assembly
Use this procedure to install a 4U PCIe riser assembly.
Before installing a 4U PCIe riser assembly:
1. Read the safety information and installation guidelines (see
“Safety” on page iii and “Installation
Guidelines” on page 56
).
To install a 4U PCIe riser assembly, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=
PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
.
Step 1. Remove the PCIe expansion tray (see
“Remove the PCIe expansion tray” on page 92) to install the
PCIe connector guide.
126
ThinkSystem SR860 Setup Guide
To Next Page
Loading...
