Table 1. Specifications (7X69 and 7X70) (continued)
Minimum configuration for
debugging
• Two processors in processor sockets 1 and 2
• Two memory DIMMs in slot 8 and 20
• One power supply
• Six system fans (fan 1 to fan 6)
• One M.2 or one HDD with RAID adapter and backplane (if OS is needed for
debugging)
Acoustical Noise
• Sound power levels, idle
– 5.8 bels, minimum
– 6.4 bels, typical
– 6.6 bels, maximum
• Sound power levels, operating
– 6.8 bels, minimum
– 7.0 bels, typical
– 7.2 bels, maximum
Note: The declared acoustic noise levels are based on specified configurations, which
may change slightly depending on configurations/conditions.
Heat output Approximate heat output:
• Minimum configuration: 579 BTU, 169 W (in BTU per hour and watts)
• Maximum configuration: 5320 BTU, 1559 W (in BTU per hour and watts)
Chapter 1. Introduction 7
To Next Page
Loading...
