Table 44. Independent mode with four processors (Processor 3 and 4, 4 to 24 total DIMMs installed in server)
Total Processor 3 Processor 4 Total
DIMMs 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 DIMMs
4 32 44 4
5 32 44 5
6 32 44 6
7 29 32 44 7
8 29 32 41 44 8
9 29 32 41 44 9
10 29 32 41 44 10
11 29 32 34 41 44 11
12 29 32 34 41 44 46 12
13 29 32 34 41 44 46 13
14 29 32 34 41 44 46 14
15 27 29 32 34 41 44 46 15
16 27 29 32 34 39 41 44 46 16
17 27 29 32 34 39 41 44 46 17
18 27 29 32 34 39 41 44 46 18
19 27 29 32 34 36 39 41 44 46 19
20 27 29 32 34 36 39 41 44 46 48 20
21 27 29 32 34 36 39 41 44 46 48 21
22 27 29 32 34 36 39 41 44 46 48 22
23 25 27 29 32 34 36 39 41 44 46 48 23
24 25 27 29 32 34 36 37 39 41 44 46 48 24
Related DIMM population sequences for four processor systems:
• Processor 3 and 4 DIMM population sequence for 25 to 48 DIMMs, see
Table 45 “Independent mode with
four processors (Processor 3 and 4, 25 to 48 total DIMMs installed in server)” on page 66
.
• To continue populating processor 1 and 2 DIMMs for a system with 4 to 24 DIMMs, see
Table 42
“Independent mode with four processors (Processor 1 and 2, 4 to 24 total DIMMs installed in server)” on
page 63
.
Chapter 3. Server hardware setup 65
To Next Page
Loading...
