Lenovo ThinkSystem ST50 V2 - Cable the Server

Figure 79. Installing the server into the rack cabinet
Step 5. Secure the tray with two M6 x 16 screws to the front of the rack cabinet.
Figure 80. Securing the tray with screws
Cable the server
Attach all external cables to the server. Typically, you will need to connect the server to a power source, to
the data network, and to storage. In addition, you will need to connect the server to the management
network.
Connect to power
Connect the server to power.
98
ThinkSystem ST50 V2 Setup Guide