Contents
Chapter 1.  Introduction .  .  .  .  .  .  .  .  . 1
Server package contents .  .  .  .  .  .  .  .  .  .  .  .  2
Server form factor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2
Features.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2
Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3
Particulate contamination .  .  .  .  .  .  .  .  .  .  8
Chapter 2.  Server components .  .  .  .  11
Front view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
Front panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  11
Side view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
Rear view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
Server locks .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
System board components .  .  .  .  .  .  .  .  .  .  18
RAID adapters .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
Internal cable routing.  .  .  .  .  .  .  .  .  .  .  .  .  19
Cable routing for drive bay 1 and bay 2 .  .  .  .  21
Cable routing for drive bay 3 .  .  .  .  .  .  .  .  23
Cable routing for optical disk drive.  .  .  .  .  .  24
Cable routing for the RAID adapter and  
drives .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
Cable routing for the power supply unit .  .  .  .  28
Cable routing for the front fan and rear fan .  .  29
Cable routing for the heat sink and fan  
module .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
Cable routing for the intrusion switch.  .  .  .  .  32
Cable routing for the thermal sensor .  .  .  .  .  33
Cable routing for the mono amplifier .  .  .  .  .  34
Cable routing for the power button with  
LED.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  35
Parts list.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  36
Power cords .  .  .  .  .  .  .  .  .  .  .  .  .  .  39
Chapter 3.  Server hardware setup .  .  41
Server setup checklist .  .  .  .  .  .  .  .  .  .  .  .  41
Installation Guidelines .  .  .  .  .  .  .  .  .  .  .  .  41
Safety inspection checklist.  .  .  .  .  .  .  .  .  43
System reliability guidelines .  .  .  .  .  .  .  .  43
Handling static-sensitive devices .  .  .  .  .  .  44
Memory module installation rules .  .  .  .  .  .  .  .  45
Drive bay locations .  .  .  .  .  .  .  .  .  .  .  .  .  46
Install server hardware options .  .  .  .  .  .  .  .  .  47
Remove the server from the rails .  .  .  .  .  .  47
Remove the server cover .  .  .  .  .  .  .  .  .  49
Remove the front bezel .  .  .  .  .  .  .  .  .  .  51
Remove the CMOS battery (CR2032) .  .  .  .  53
Install a simple-swap drive and drive cage 
(bay 1-2) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  55
Install a simple-swap drive and the drive cage (bay  
3) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  65
Install an optical drive and the drive cage .  .  .  71
Install the intrusion switch .  .  .  .  .  .  .  .  .  78
Install the fan (front and rear) .  .  .  .  .  .  .  .  80
Install a memory module .  .  .  .  .  .  .  .  .  82
Install an M.2 drive .  .  .  .  .  .  .  .  .  .  .  .  84
Install the M.2 drive retainer .  .  .  .  .  .  .  .  85
Install a PCIe adapter .  .  .  .  .  .  .  .  .  .  .  86
Install the CMOS battery (CR2032) .  .  .  .  .  89
Install the front bezel .  .  .  .  .  .  .  .  .  .  .  91
Install the server cover .  .  .  .  .  .  .  .  .  .  92
Install the server to the rails .  .  .  .  .  .  .  .  95
Cable the server .  .  .  .  .  .  .  .  .  .  .  .  .  .  98
Power on the server .  .  .  .  .  .  .  .  .  .  .  .  .  99
Validate server setup.  .  .  .  .  .  .  .  .  .  .  .  .  99
Power off the server .  .  .  .  .  .  .  .  .  .  .  .  .  99
Chapter 4.  System configuration .  .  . 101
Update the firmware .  .  .  .  .  .  .  .  .  .  .  .  .  101
Configure the firmware .  .  .  .  .  .  .  .  .  .  .  .  101
Starting the Setup Utility program .  .  .  .  .  .  101
Changing the display language of the Setup 
Utility program .  .  .  .  .  .  .  .  .  .  .  .  .  101
Enabling or disabling a device .  .  .  .  .  .  .  101
Enabling or disabling the automatic power- 
on .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  102
Acoustic/Thermal optimal performance.  .  .  .  102
Configuration change detection.  .  .  .  .  .  .  103
Using passwords .  .  .  .  .  .  .  .  .  .  .  .  103
Selecting a startup device .  .  .  .  .  .  .  .  .  105
Exiting the Setup Utility program .  .  .  .  .  .  105
Memory configuration .  .  .  .  .  .  .  .  .  .  .  .  105
RAID configuration .  .  .  .  .  .  .  .  .  .  .  .  .  106
Deploy the operating system.  .  .  .  .  .  .  .  .  .  106
Back up the server configuration .  .  .  .  .  .  .  .  107
Update VPD (Vital Product Data) .  .  .  .  .  .  .  .  107
Chapter 5.  Resolving installation  
issues .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 109
Appendix A.  Getting help and 
technical assistance .  .  .  .  .  .  .  .  .  . 113
Before you call .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  113
Contacting Support .  .  .  .  .  .  .  .  .  .  .  .  .  114
Appendix B.  Trademarks .  .  .  .  .  .  . 115
© Copyright Lenovo 2022, 2022 i