Figure 75. Installing the server cover
Install the server to the rails
Follow this procedure to install the server to the rails.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
Chapter 3. Server hardware setup 95
To Next Page
Loading...
