Cable routing for the RAID adapter and drives
Read this section to learn about cable routing for the RAID adapter and drives.
RAID adapter cable
The break lines indicate that part of the cable is hidden in the illustration.
Figure 17. Mini SAS HD to 4 SATA 7-pin cable
Table 15. Mini SAS HD to 4 SATA 7-pin cable
1 Connector for the RAID adapter (connector C0). See
“RAID adapters” on page 19.
2 Connectors for the drives
Cable routing for three drives with the RAID adapter
Note: The RAID adapter should be installed in PCIe slot 1.
Figure 18. Cable routing for three drives with the RAID adapter
Table 16. Cable routing for three drives with the RAID adapter
Cable
From To
1 Mini SAS HD to 4 SATA
7-pin cable
1a cable labeled as “0”
Bay 1 drive signal
connector
C0 connector on the RAID
adapter
Chapter 2. Server components 25
To Next Page
Loading...
