Drive bay 2
Figure 14. Cable routing for drive bay 2
Table 12. Cable routing for drive bay 2
Cable
From To
1 1st 3.5 or 2.5 HDD SATA cable,
185 mm
Bay 2 drive signal connector
SATA 2 connector
2 1st 3.5 and 2.5 HDD Power Cable
(300 mm + 80 mm)
Bay 2 drive power connector and bay
1 drive power connector
SATA power 2 connector
Make sure to follow the “Cable routing guidelines” in “Internal cable routing” on page 19.
For the system-board connector locations, see “System board components” on page 18.
22
ThinkSystem ST50 V2 Setup Guide
To Next Page
Loading...
