Lenze 8200 vector - Page 101

3
Electrical installation
Mains connection 230 V/240 V
EDK82EV113 DE/EN/FR 8.1
L
100
Fuses and cable cross−section (operation with rated power)
Operation without mains choke
Installation to EN 60204−1 Installation to UL
1)
8200 vector mains
 
L1, L2, L3,
PE

L1, L2, L3,
PE
FI
Type [kW] [mm
2
] [AWG]
E82EV302K2C 3.0
3/PE AC
100 ... 264 V;
45 ... 65 Hz
M20 A B20 A 4 20 A 12
 300 mA
2)
 30 mA
3)
E82EV402K2C 4.0
M25 A B25 A 4 25 A 10
E82EV552K2C 5.5
M35 A − 6
4
) 35 A 8
E82EV752K2C 7.5
Operation only with mains choke
Operating with mains choke
Installation to EN 60204−1 Installation to UL
1)
8200 vector mains
 
L1, L2, L3,
PE

L1, L2, L3,
PE
FI
Type [kW] [mm
2
] [AWG]
E82EV302K2C 3.0
3/PE AC
100 ... 264 V;
45 ... 65 Hz
M16 A B16 A 2.5 15 A 14
 300 mA
2)
 30 mA
3)
E82EV402K2C 4.0
M20 A B20 A 4 20 A 12
E82EV552K2C 5.5
M25 A B25 A 4 25 A 10
E82EV752K2C 7.5
M35 A − 6
4)
35 A 8
 Fuse
 E.l.c.b.
1)
Use UL−approved cables, fuses and fuse holders only.
UL fuse: voltage 240 V, tripping characteristic "H", "K5" or "CC"
2)
All−current sensitive e.l.c.b. for use with E82EVxxxK2C0xx
3)
All−current sensitive e.l.c.b. for use with E82EVxxxK2C2xx
4)
Flexible cable can only be connected using pin end connectors.
Observe national and regional regulations (e. g. VDE 0113, EN 60204)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com