Lenze 8200 vector - Page 130

Commissioning
Using the keypad XT EMZ9371BC − Parameter setting
7
EDK82EV113 DE/EN/FR 8.1
129
L

Adoption of parameters
Display Meaning Explanation

Parameters are adopted immediately Basic device operates immediately with the new
parameter value
SHPRG  Parameter must be confirmed with  
Basic device operates with the new parameter
value, after it was confirmed
SHPRG In case of controller inhibit the parameter must be
confirmed with
 
Basic device operates with the new parameter
value, after the controller has been enabled
none Display parameter Change not possible

Active level
Display Meaning Explanation
Menu Menu level active Select main menu and submenus
Code Code level active Select codes and subcodes
Para Parameter level active Change parameters in the codes or subcodes
none Operation level active Display operation parameters:
l User menu, memory location 1 (C0517/1)
l Status display C0004 in %
l Active fault

Short text
Display Meaning Explanation
max. 13 characters Contents of menus, meaning of codes and
parameters
In operation level display of C0004 in % and active
fault

Number
Active level Meaning Explanation
Menu level Menu number Display only active when operating with the basic
device series 8200 vector or 8200 motec
Code level four−digit code number

Number
Active level Meaning Explanation
Menu level Submenu number Display only active when operating with the basic
device series 8200 vector or 8200 motec
Code level two−digit subcode number

Parameter value
Parameter value with unit

Cursor
In the parameter level the number above the cursor can be directly changed

Function keys
For description see the following table
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com