Lenze 8200 vector - Page 134

Commissioning
Using the keypad XT EMZ9371BC − Parameter setting
7
EDK82EV113 DE/EN/FR 8.1
133
L
Main menu DescriptionSubmenus
No.
Description
DisplayNo.Display
8 Main FB See description of the keypad Configuration of function blocks
9 Controller See description of the keypad Configuration of internal control parameters
10 Terminal I/O See description of the keypad Linkage of inputs and outputs with internal signals and display of
the signal levels at the terminals
11 LECOM/AIF See description of the keypad Configuration of operation with communication modules
12 FIF system bus See description of the keypad Configuration of operation with function module system bus (CAN)
and display of the contents of the CAN objects
Only active with function module system bus (CAN)
13 FIF−field bus See description of the keypad Configuration of operation with field bus function modules
Only active with fieldbus function module
14 Motor/Feedb. Input of motor data, configuration of speed feedback
14.1 Motor data Motor data
14.2 Feedback DFIN Frequency input, encoder
15 Identify Identification
15.1 Drive Software version controller
15.2 Keypad Software version keypad
15.3 FIF module Software version and function module type
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com