Lenze 9300 vector - Page 464

Appendix
Index
14
14.2

14.2−7
EDSVF9383V EN 6.0−11/2009
Terminal data, 5.5−2 , 11.3−1
Terms
− controller, 14.1−1
− Definitions, 14.1−1
− drive, 14.1−1
Thermal monitoring, motor, with PTC thermistor, 6.6−9 ,
6.6−11
Tn current controller, 6.8−8 , 8.2−28 , 8.2−43 , 8.5−8
Tn slip controller, 6.11−1 , 8.2−29 , 8.5−8
Tn speed controller, 8.2−28 , 8.2−43 , 8.5−8
Torque control with speed limitation, in case of vector
control (MCTRL2), 8.2−53
Torque limitation in the field weakening range, with
vector control (MCTRL2), 8.2−50
TRIP, 8.3−1
Troubleshhoting and fault elimination, monitoring,
DC−bus voltage, 8.3−7
Troubleshooting, 9.2−1
− Drive behaviour in the event of faults, 9.3−1
− Drive errors, 9.4−1
Troubleshooting and fault elimination, 9−1
− Monitoring, 8.3−1
Current load of controller (Ixt monitoring), 8.3−4
DC−bus voltage, 8.3−7
Heatsink temperature, 8.3−6
Monitoring times for process data input objects, 8.3−2
− monitoring
bus off, 8.3−2
motor temperature, 8.3−5
reset node, 8.3−2
responses, 8.3−1
Type−specific accessories, 13.2−1
U
Umin boost, 6.8−6
Undervoltage threshold, DC−bus voltage, 8.3−7
V
V/f characteristic, setting of, 8.2−31
V/f characteristic control, 6.8−4
− boost correction, 6.11−5
− commissioning example, 6.3−1
Vector control, 6.8−8
− commissioning example, 6.3−5
− optimising motor magnetising current, 6.11−9
Voltage boost, optimising via boost correction, 6.11−5
Voltage drop, 3.7−1
Voltage supply, Via internal voltage source, 5.5−5 , 5.5−7
Preface, 1−1
Vp current controller, 6.8−8 , 8.2−28 , 8.2−43 , 8.5−8
VP field precontrol, 6.11−5 , 6.11−10 , 8.5−8
Vp speed controller, 8.2−28 , 8.2−43 , 8.5−8
W
Warning, 8.3−1
Warranty, 1.2−2
Weights, 3.1−2
Wiring
− digital frequency input to X9, 5.8−1
− digital frequency output to X10, 5.8−1
− system bus (CAN), 5.6−1
Wiring according to EMC, 5.3−1 , 5.4−1
X
XT EMZ9371BC keypad, Menu structure, 7.2−11
efesotomasyon.com - Lenze