Lenze 9300 vector - 6.7.2 Incremental encoder with HTL level at X9

Commissioning
Setting the speed feedback
Incremental encoder with HTL level at X9
6
6.7
6.7.2

6.7−3
EDSVF9383V EN 6.0−11/2009
6.7.2 Incremental encoder with HTL level at X9
On X9, incremental encoders with HTL level can be operated. Wiring diagram
and pin assignment of X9 are described in chapter "Wiring of the standard
device" ® "Wiring of the feedback system".
ƒ C0025 = 101. In addition, you have to set the number of increments in
C0420.
The incremental encoder must be operated with an external supply voltage.
C0421 has no influence.
ƒ Incremental encoders with HTL level require DC 8 ... 30 V supply
voltage. Please observe the information by the manufacturer.
Activation
Adjustment
efesotomasyon.com - Lenze