Safety instructions
General safety and application notes for Lenze controllers
2
2.1
2.1−1
EDSVF9383V EN 6.0−11/2009
2.1 General safety and application notes for Lenze controllers
(in accordance with Low−Voltage Directive 2006/95/EC)
Disregarding the following safety measures can lead to severe injury to
persons and damage to material:
ƒ Only use the product as directed.
ƒ Never commission the product in the event of visible damage.
ƒ Never commission the product before assembly has been completed.
ƒ Do not carry out any technical changes on the product.
ƒ Only use the accessories approved for the product.
ƒ Only use original spare parts from Lenze.
ƒ Observe all regulations for the prevention of accidents, directives and
laws applicable on site.
ƒ Transport, installation, commissioning and maintenance work must
only be carried out by qualified personnel.
– Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC
report 664 or DIN VDE 0110 and all national regulations for the
prevention of accidents.
– According to the basic safety information, qualified, skilled personnel
are persons who are familiar with the assembly, installation,
commissioning, and operation of the product and who have the
qualifications necessary for their occupation.
ƒ Observe all specifications in this documentation.
– This is the condition for safe and trouble−free operation and the
achievement of the specified product features.
– The procedural notes and circuit details described in this
documentation are only proposals. It is up to the user to check
whether they can be transferred to the particular applications. Lenze
Automation GmbH does not accept any liability for the suitability of
the procedures and circuit proposals described.
ƒ Lenze controllers (frequency inverters, servo inverters, DC speed
controllers) and the accessory components can include live and
rotating parts − depending on their type of protection − during
operation. Surfaces can be hot.
– Non−authorised removal of the required cover, inappropriate use,
incorrect installation or operation create the risk of severe injury to
persons or damage to material assets.
– For more information, please see the documentation.
ƒ High amounts of energy are produced in the controller. Therefore it is
required to wear personal protective equipment (body protection,
headgear, eye protection, ear protection, hand guard).
For your personal safety
efesotomasyon.com - Lenze
To Next Page
Loading...
