Lenze 9300 vector - 6.8 Operating mode

Commissioning
Operating mode
6
6.8

6.8−1
EDSVF9383V EN 6.0−11/2009
6.8 Operating mode
The control mode of the controller can be selected via the operating mode.
You can select between the following modes:
ƒ V/f characteristic control
ƒ Vector control
The V/f characteristic control is the classic operating mode for standard
applications.
When using the vector control you will achieve improved drive features
compared to the V/f characteristic control due to:
ƒ Higher torque via the complete speed range
ƒ Higher speed accuracy and higher concentricity factor
ƒ Higher efficiency
Description
Selection of the correct
operating mode
efesotomasyon.com - Lenze