Lenze 9300 vector - 8.3.7 Heatsink temperature

Configuration
Monitoring
Heatsink temperature
8
8.3
8.3.7

8.3−6
EDSVF9383V EN 6.0−11/2009
8.3.7 Heatsink temperature
Via a temperature threshold, the heatsink temperature of the controller can
be monitored:
ƒ Adjustable threshold (OH4) under C0122
– The reset point is 5° C below the adjusted threshold.
ƒ Fixed threshold (OH) = 85° C
– The reset point is at 80° C.
The response for exceeding the adjustable threshold can be set under C0582.
efesotomasyon.com - Lenze