Lenze 9300 vector - 5.4 Basic devices in the power range 250... 400 kW; 5.4.1 Wiring according to EMC (CE-typical drive system)

Wiring of the standard device
Basic devices in the power range 250 ... 400 kW
Wiring according to EMC (CE−typical drive system)
5
5.4
5.4.1

5.4−1
EDSVF9383V EN 6.0−11/2009
5.4 Basic devices in the power range 250 ... 400 kW
5.4.1 Wiring according to EMC (CE−typical drive system)
The drives comply with the EC Directive on "Electromagnetic Compatibility"
if they are installed in accordance with the specifications for the CE−typical
drive system. The user is responsible for the compliance of the machine
application with the EC Directive.
 Note!
Observe the notes given in chapter "Basics for wiring according
to EMC"!
efesotomasyon.com - Lenze