Lenze E84AVSC - Page 76

8400 StateLine C | Operating instructions
Index
76 L from Firmware V06.00 - DMS 1.1 EN - 11/2011
F
Fixed setpoint 1...3 (C00039/1...3) 40
I
Imax in motor mode (C00022) 36
K
Keypad 14, 15
Language selection 18
L
L_MPot_1
Acceleration time (C00802)
68
Deceleration time (C00803) 68
Inactive fct. (C00804) 68
Init fct. (C00805) 68
Lower limit (C00801) 68
Upper limit (C00800) 68
Use (C00806) 68
L_NSet_1
Max.SkipFrq. (C00632/x)
61
Min.SkipFrq. (C00633/x) 61
nMaxLimit (C00635) 60
nMinLimit (C00636) 60
L_PCTRL_1
Acceleration time (C00227)
72
Acceleration time influence (C00243) 72
ActEqSet window (C00247) 72
Deceleration time (C00228) 72
Deceleration time influence (C00244) 72
Kd (C00224) 72
MaxLimit (C00225) 72
MinLimit (C00226) 72
Operating mode (C00242) 72
Root function (C00233) 72
Tn (C00223) 72
Vp (C00222) 72
Language of keypad 18
L-force »EASY Starter« 13
L-force »Engineer« 13
Load Lenze setting (C00002/1) 25
M
Main setpoint
Acceleration time
40
Deceleration time 40
Ramp smoothing 62
Mains voltage (C00173) 37
Max. neg. output frequency (C00910/2) 44
Max. pos. output frequency (C00910/1) 44
MCK
Limitations (C02611/x)
60
Memory module 11, 20
Monitoring 48
Motor control (C00006) 42
Multilingualism 18
P
Power terminals 10
Q
QSP (Quick stop) 40
Quick stop (QSP) 40
R
Ramp rounding main setpoint (C00134) 62
Reset error (C00002/19) 26
Restore delivery status 25
S
Save all parameter sets (C00002/11) 25
Setting of motor overload (I²xt) (C00120) 36
Slip compensation (C00021) 43
Status of last device command (C00003) 26
Switching frequency (C00018) 43
U
USB diagnostic adapter 14
User menu 21
V
V/f characteristic control (VFCplus) 27
VFC - Voltage Frequency Control 27
V/f base frequency (C00015) 35
Vmin boost (C00016) 36