Lenze E94AYCEO - Page 73

9 Parameter data transfer (explicit messages)
9.2 Read parameters
73
Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For every "explicit message", the path for sending the message via the Ethernet port of the
controller (scanner) to the IP address of the drive (adapter) needs to be set under the
Communication tab.
If you need assistance with the setting of this path, please consult the PLC manufacturer.