Troubleshooting and fault elimination
Status display
9
l
80
LDEDS−CCU210B EN 4.0
Special displays
Via C0500 you can activate some special displays which are shown during operation instead of the
standard displays.
Pos. Display Description
1
− 88.8Drive frequency with sign [Hz]
8 8 8 U DC−bus voltage [V]
8 8. 8 A Motor current [A]
8 8 8 C Output stage temperature [°C]
8 8 8 8 Status of the digital inputs and control bars [hex]
8 8 Status of the digital outputs and message bars [hex]
8 8 8 8 SensoPart: distance [mm]
8 8 Status of the seconds counter [s]
C 8 8 8 HWC command status
8 8 8 8 Status of encoder position value [mm]
− 8 8 8 Status of system deviation with sign [mm]
− 8 8 8 Status of IrDA difference position with sign [mm]
8. 8. 8. 8. User−specific display
Codes for parameter setting
Code Possible settings Description
No. ñò < Byte Lenze Selection
C0500 RW EXT 4 0
Display code for 7−segment display
^ 80
0 Standard display
1 Drive frequency with sign [Hz]
2 DC−bus voltage [V]
3 Motor current [A]
5 Output stage temperature [°C]
7 Status of the digital inputs and
control bars [hex]
8 Status of the digital outputs and
message bars [hex]
9 SensoPart: distance [mm]
10 Status of the seconds counter [s]
11 HWC command status
12 Status of encoder position [mm]
13 Status of system deviation [mm]
15 IrDA position value [mm]
201 Reserved for customer−specific
displays
To Next Page
Loading...