Lenze PROFINET 9400

3 Product description
3.1 Application as directed
12
Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 11.0 EN · 04/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Product description
3.1 Application as directed
The communication module ...
• is an accessory module that can be used in conjunction with the following standard devices:
• must only be used together with the following safety modules:
• is a device intended for use in industrial power systems.
• should only be used under the operating conditions prescribed in this documentation.
• can only be used in PROFINET networks.
Any other use shall be deemed inappropriate!
3.2 Identification
The type designation and the hardware and software versions of the communication module are
indicated on the nameplate:
[3-1] Identification data
Product series Type designation From hardware
version
From software
version upwards
Servo Drives 9400 HighLine E94AxHExxx 1A 04.00
Servo Drives 9400 PLC E94AxPExxxx VA 02.00
Regenerative power supply module E94ARNxxxx VA 01.00
Product series Type designation From hardware
version
From software
version upwards
SM301 safety module E94AYAE VB 1.1
SM302 safety module
(from SW version 3.00 onwards)
E94AYAF VA 1.0
E94YCET005
1Type designation
E94 Product series
AVersion
Y Module identification: Extension module
C Module type: Communication module
ER PROFINET
2 Hardware version
3Software version