Lenze PROFINET 9400 - Error Messages; Short Overview of the PROFINET Error Messages

Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 11.0 EN · 04/2016 · TD17 85
13 Error messages
13.1 Short overview of the PROFINET error messages
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13 Error messages
This chapter supplements the error list in the reference manual and in the »Engineer« online help
for the Servo Drive 9400 by the error messages of the communication module.
13.1 Short overview of the PROFINET error messages
The following table contains all error messages of the communication module in numerical order of
the error numbers. Moreover the preset error response and - if applicable - the parameters for
setting the error response are specified.
 Tip!
If you click on the cross-reference in the first column, you will get a detailed description
(causes and remedies) of the corresponding error message.
 Reference manual / »Engineer« online help for Servo Drive 9400
Here you will find general information on diagnostics & fault analysis and on error
messages.
Error number Name Response (Lenze setting) Adjustable in
hex dec
0x00c85531
13129009 PROFINET: Memory: No access 6: Information -
0x00c85532
13129010 PROFINET: Memory: Read error 6: Information -
0x00c85533
13129011 PROFINET: Memory: Write error 6: Information -
0x00c86010
13131792 PROFINET: Restart by watchdog reset 1: No Response -
0x00c86011
13131793 PROFINET: Internal error 1: No Response -
0x00c86100
13132032 PROFINET: Internal error 1: No Response -
0x00c86101
13132033 PROFINET: Internal error 1: No Response -
0x00c86110
13132048 PROFINET: Internal mapping error 4: Warning locked -
0x00c8641f
13132831 PROFINET: Invalid parameter set 1: No Response -
0x00c86420
13132832 PROFINET: Error: Lenze setting loaded 1: No Response -
0x00c86430
13132848 PROFINET: Invalid module configuration 6: Information -
0x00c86501
13133057 PROFINET: Invalid READ.request during parameter access 4: Warning locked -
0x00c86502
13133058 PROFINET: Invalid WRITE.request during parameter access 4: Warning locked -
0x00c86503
13133059 PROFINET: Data output status bad 4: Warning locked -
0x00c86532
13133106 PROFINET: Station name error 1: No Response -
0x00c86533
13133107 PROFINET: Invalid IP parameters 1: No Response -
0x00c86610
13133328 PROFINET: Safety communication timeout 4: Warning locked -
0x00c86611
13133329 PROFINET: Safety parameter timeout 4: Warning locked -
0x00c86612
13133330 PROFINET: Safety init error 4: Warning locked -
0x00c86613
13133331 PROFINET: Safety connect error 5: Warning -
0x00c86650
13133392 PROFINET: Internal error 6: Information -
0x00c88131
13140273 PROFINET: "Data_Exchange" status quit 0: No Response C13880/1 /
C14880/1