Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 11.0 EN · 04/2016 · TD17 15
4Technical data
4.1 General data and operating conditions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4 Technical data
4.1 General data and operating conditions
Range Values
Order designation E94AYCER
Communication profile PROFINET
Communication medium S/FTP (Screened Foiled Twisted Pair, ISO/IEC 11801 or EN 50173), CAT 5e
Interface for communication RJ45: Standard Ethernet (in accordance with IEEE 802.3), 100Base-TX (Fast
Ethernet)
Network topology Tree, star, and line
Type of node I/O device with real time (RT) communication properties
Number of device nodes Max. 255 in the subnetwork
Max. cable length 100 m
PNO identification number 0x0106
Device identification (Device ID) 0x9400
TCP port 9410
Number of TCP ports • 1
•3 (from SW version 2.10)
Optional PROFINET functions
(from SW version 2.10)
• Multiple access (Shared Device)
• MRP (Media Redundancy Protocol)
Baud rate 100 Mbps
Minimum cycle time • 4 ms
•2 ms (from SW version 2.10)
Switching method • "Store and forward"
• "Cut-Through" (from SW version 2.10)
Switch latency • Approx. 125 μs at max. frame length
•6 μs (from SW version 2.10)
Voltage supply External supply via separate power supply unit
+: U = 24 V DC (20.4 V ... 28.8 V), I = 130 mA
-: reference potential for external voltage supply
Conformities, approvals CE 2004/108/EC, EMC Directive
2006/95/EC, Low-Voltage Directive
EAC Eurasian conformity
TR CU: Technical Regulations of Customs Union
TP TC 004/2011 (TR CU 004/2011)
About the safety of low voltage equipment
TP TC 020/2011 (TR CU 020/2011)
Electromagnetic compatibility of technical means
UL UL 508C, Power Conversion Equipment (file no. E132659)
Servo Drives 9400 hardware manual
Here you can find the ambient conditions and data on the electromagnetic compatibility
(EMC), which also apply to the communication module.
To Next Page
Loading...
