Lenze PROFINET 9400 - Page 48

6 Commissioning
6.4 Setting the IP configuration
48
Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 11.0 EN · 04/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Here, activate Assign IP parameters and enter the IP address for the node that lacks an IP
address.
4. Click the Download button to transfer the assigned IP address.
Every IP address must be transferred individually to the corresponding IO device via the
Load button.
In our example, IP address 172.31.200.1 has been allocated to the Servo Drive 9400 with
MAC address 00-0A-86-20-10-5D.