Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 11.0 EN · 04/2016 · TD17 5
1 About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Target group
This documentation addresses to persons who configure, install, commission, and maintain the
networking and remote maintenance of a machine.
Tip!
Current documentation and software updates with regard to Lenze products can be found
in the download area at:
www.lenze.com
Information regarding the validity
The information given in this documentation is valid for the following devices:
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the communication module and software version of the engineering tools installed
(e.g.
»Engineer«, »STEP7«)
, the screenshots in this documentation may differ from the screen
representation.
Extension module Type designation From hardware
version
From software
version
PROFINET communication module E94AYCER VE 01.40
To Next Page
Loading...
