CMVETH01B 40
Cyclic Data Access
NOTE 1: Digital Input/Output State
Word – Digital Input/Output State
Bit 0
Bit 1
Bit 2 Output Fault
Bit 3 Fast Current Limit State
Bit 4 TB1 ON
Bit 5
Bit 6 TB13A
Bit 7 TB13B
Bit 8 TB13C
Bit 9 TB14 Out State
Bit 10 Relay State
Bit 11 Charge Relay
Bit 12 Assertion level
Bit 13
Bit 14
Bit 15
Input Assembly 106 Options
In addition to all drive parameters that can be specified in Parameters P450 ... P453, there are additional
status and real-time values (range 1-12) that can be specified.
• P45x = 1, SMV Status Word
• P45x = 2, Actual Frequency
• P45x = 3, Lenze C150 Status Word
• P45x = 4, Actual Speed in RPMs
• P45x = 5, Auxiliary Status
• P45x = 6, Drive RUN Status
• P45x = 7, Drive Fault Status
• P45x = 8, Digital I/O Status
• P45x = 9, Analog 0-10V Input
• P45x = 10, Analog 4-20mA Input
• P45x = 11, Actual PID Setpoint
• P45x = 12, Actual PID Feedback
To Next Page
Loading...
