Lenze SX-1 - Memory and Position Instructions

8.2.2
MOV Vddd -> EEPROM
Meaning:
Variable Vddd is saved in LEPROM.
Variable number V: ddd = 0 ... 255
MOVEEPROM ->RAM
Meaning:
All variables which are in RAM are over-written with values from FEPROM.
PA vvvvv.vvv DP
Meani ng:
With a circular axis, or endless belt drive , the shortest route to an absolute position is used.
(DP = Direct Positioning).
Value: vvvvv.vvv = +99999.999 ... -99999.999
SET P = Vddd
Meaning:
The present position is set internally to the value ot Vddd. The Reterence and Actual
position counters are set accordingly.
SET POS = ISTPOS
Meaning:
The present Actual position is used as the Reference position, and thereby the position
controller is overridden.
8/18
Lanze