Lenze SX-1 - Page 123

8.3 ____
3. Type in the code number: tinish with
ENTER.
The PROGRAMMING LED is extinguished, and
PARAMETER remains on.
5. Press the PROG key. The menu
shown at the side appears. Position
the cursor with the MODE key, accor -
ding to whether you wish to Edit a Pro -
gram, create a New Program, Erase a _____________________
Program, or List the Programs. (For fur -
ther details of these tunctions, see the
end ot this Chapter).
6. Here: Select „New PGM“ in the second
line using the MODE key, and press
ENTER.
7. The required Program number must
now be chosen: e. g. type 6 and press
ENTER. ___________________
Line 1
BIk: = number 01 instructions in working line
M: 16 = amount 01 memory required
Line 2
empty
Line 3 and 4:
Beginning and End 01 Main Program M6.
7. Press INS (= Insert) key.
The cursor is inserted between the BEG and END
instructions. The PT-1 is now ready forthe entryof
program instructiOns.
8/23 —________ _____ ___— --__
Blk: ~ M: 16
BEG M
END M
P~ (TYP. ~)
H-V14
Pgm#
Resol.
Edit PGM
New PGM
Erase PGM
List of PGM‘s
Program in PT-1 will be
erased
PgmNo=
BIk:~I M: 16
BEG M ~O~6
END M ~I~%6
Lanze