Lenze SX-1 - Erase PGM and List Programs; Editing Function Commands

8.3 ____
Erase PGM
lt the main menu is displayed, select
ERASE PGM on the third line by using
the MODE key to move the cursor to it.
Commence with ENTER:
El ____
The Program to be deleted is requested.
Enterthe numberand press ENTER.
El ____
The program is deleted and the main _______________________
menu re-appears.
LIST OF PGM‘s
lt the main menu is displayed, select
LIST OF PGM‘s on the last line by using
the MODE key to move the cursor to lt.
Commence with ENTER:
To display further Programs, use the
arrow keys. When the last program is
displayed, the tourth line remains empty.
Funotion Commands tor Editing
Four Functions are available tor handling instructions whilst programming:
DELETE (Delete an lnstruction)
INSERT (Insert an Instruction)
TEACH (Insert one or more „taught“ position movements)
LABEL (Jump address label)
8/29 —____ _____
Erase PGM
PgmNo =
[ Edit PGM
New PGM
ERASE PGM
List of PGM‘s
List of PGM‘s
1 = PGM~~~1
2 = PGM ~4
3 = PGM~~12
Lanze