Leuze electronic SOLID-2 Series - 4 Display Elements; Transmitter Status Displays

Display elements
Leuze electronic SOLID-2 17
TNT 35/7-24V
Review-Stand, , 8. April 2015
DEUTSCHENGLISHFRANÇAISITALIANOESPAÑOLNEDERLANDS
4 Display elements
4.1 Transmitter status displays
When the transmitter’s green LED1 is lit, this indicates that the supply voltage is available.
Display of the current state of the transmitter:
a = LED1 (green/red)
b = LED2 (green/red)
Fig. 4.1-1: Transmitter, LED status displays
Indication Meaning
LED1 green LED2 off Supply voltage present, TC1 selected
LED1 green LED2 green Supply voltage present, TC2 selected
LED1 green LED2 red Supply voltage present, TC1 or TC2 selected, external
test signal activated
LED1 red LED2 any state Device fault
Table 4.1-1: Transmitter, LED status displays
ab