The default login ID and password for the Administrator are:
Login ID Password
root
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password be altered
for the security concerns.
Additionally, users can change the IP Camera’s network property, either DHCP or Static
IP directly in the device finding list. Refer to the following section for changing the IP
Camera’s network property.
Example of Changing IP Camera’s Network Property
Users can directly change an IP Camera’s network property, ex. from static IP to DHCP,
in the finding device list. The way to change the IP Camera’s network property is specified
below:
Step 1:
In the finding device list, click on the IP Camera that you would like to change its network
property. On the selected item, right click and select “Network Setup.” Meanwhile, record
the IP Camera’s MAC address, for future identification.
To Next Page
Loading...
