LevelOne WAB-7400 - Page 32

31
Figure 5.2.3: NTP – add or edit page
NTP add or edit page contains the following parameters:
 Server: Specify the name of IP address of the NTP server.
 Min Poll: Specify the minimum number of times that the device should poll
the server.
 Max Poll: Specify the maximum number of times that the device should poll
the server.
 Comments: You may include comments or a description.
 Active: Choose to enable or disable the NTP Server entry.
 Click on the Save Changes button to store and changes and then reboot the
device in order for the changes to take effect.