Levitronix PuraLev 600SU - Page 11

User Manual for PuraLev
®
600SU
www.levitronix.com
PL-4032-00, Rev06, DCO# 20-144
11
Cable
Jacket
Cable OD
Motor Sensor
Cable OD
Motor Power
Minimum Bending Radius
Permanent Installation
Minimum Bending Radius
Sometimes Moved
FEP
6.60 mm
8.40 mm
7x Cable OD
15 x Cable OD
PVC
7.20 mm
11.1 mm
5x Cable OD
11 x Cable OD
Table 6: Specifications for min. bending radius of motor and adaptor cables
Note: If not mentioned explicitly all the cables are not suited for constant dynamic bending and movement!
Figure 10: Basic dimensions (in mm and [inch]) of air cooling module ACM-600.2
(Same basic dimensions for ACM-600.3)
Figure 11: Basic dimensions (in mm and [inch]) of controller LPC-600.2-01
(Same basic dimensions for LPC-600.1-01)
Alternative for
mounting DIN
rail clips
Screw Torque Spec.:
M3: 20 Ncm (Stainless Steel)
M5: 40 Ncm (Stainless Steel)