User Manual for PuraLev
®
600SU
www.levitronix.com
PL-4032-00, Rev06, DCO# 20-144
5.3 System Operation for ATEX / IECEx Applications
Specific precautions may be considered while using the pump system in potential explosive gas
atmospheres according to ATEX category 3G/3D (Zone 2 and 22).
The user shall prevent priming issues during normal pump operation. Special precautions have to be
considered during installing and maintenance operations to prevent the occurrence of combustible
atmospheres.
The user shall prevent electrostatic charging of the system during cleaning processes by using dry cleaning
cloth. User shall use wet cleaning rags to avoid issues with charging during a cleaning process.
Precautions have to be considered to prevent priming issues during
installation operation and maintenance of the pump head / motor.
Operational Temperature T5
Maximum allowed pump liquid temperature is 90°C / 194°F for the use
in ATEX Zone 2 applications.
Do not operate the pump against closed valves
Refer to the corresponding section in the manual.
To Next Page
Loading...
