Lexicon PCM 81 - REV 2 - Sends

SENDS
The Sends parameter routes the PCM 81’s two panned input
signals to the four effect inputs (the Rvb and FX blocks). This
parameter has a range of 0–300. The value of this parameter
3-46
Algorithms and Parameters
Lexicon
Sends ReturnsRouting
1
2
PAN PAN
L R L R
3
4
Stereo Effect
and Delay
Stereo
Reverb
Rvb into FX FX into Rvb
1
2
3
4
INPUTS
OUTPUTS
Stereo
Reverb
Rvb Input Level
Rvb Input Width
Rvb Time & Design
Rvb Output Level
Rvb Output Width
Rvb Dry/Wet Mix
High Cut/Low Cut
High Cut
FX Input Level
FX Input Width
FX Filters & Levels
FX Output Level
FX Output Width
FX Dry/Wet Mix
High Cut/Low Cut
Stereo Effect
and Delay
Low Cut High Cut Low Cut
LR
InLvl
1.5 1.61 1.0 1.1 1.2 1.3 1.4
1.7 1.8 1.9
Submixer Sends Returns Routing *Mix *In W *HiCut *LoCut *OutLvl *Out W*InLvl
These parameters provide complete configuration and routing control of the effects.
The Dual-Chmb, Dual-Plt, Dual-Inv and Stereo-Chmb algorithms contain a complete dual-channel effects mixer.
determines what mix of the left and right input signals is fed to the
stereo inputs of the Rvb and FX blocks. The values 0, 100, 150,
200, 300 correspond to specific configurations and are labeled
with text instead of numbers.