2-5
Basic Operation
PCM 81
Selections of various system states and conditions are made in
Control Mode. Press Control to enter this mode. The Control
button LED will light to indicate that the mode is active. Note that
Control Mode functions are not available when the Compare
function is active.
The Control Mode matrix is shown above. Following are
descriptions of each available selection.
2 2.0 2.1 2.2
3 3.0 3.1 3.2 3.3 3.4
4 4.0 4.1
0 0.0 0.1 0.2 0.3 0.4 0.5 0.6
1.5 1.61 1.0 1.1 1.2 1.3 1.4
Audio
*Word Clock
1.7 1.8
3.5 3.6 3.7 3.8 3.9
System
Card
MIDI
Chain
Mapx
Setup
Analog In Lvl Dig In Lvl Word Size SCMS Emphasis Bit Output Level
Edit Mode Mix Mode Tempo Mode Bypass Mode Pgm Bypass Mem Protect Auto Load
Patch Update Initialize
Bank Copy Load Format
Reset Receive Transmit *Pgm Change Automation *Send Int Clock SysEx Dump Dump Speed
Map 0 Map 1
Chain
Pgm Assign
Chain 0 Chain 1 Chain 2 Chain 3 Chain 4 Chain 5 Chain 6 Chain 7 Chain 8 Chain 9
Store Load
Simultaneously press Up and Down to return to 0.0.
An asterisk (✱) accompanying a parameter name indicates that there are subparameters available
at that matrix location. The Load/✱ LED will light whenever an asterisk appears in the display. Press
Load/✱ to step to the next sub parameter. From any point the the matrix, press Up or Down together
with Load/k to backste
To Next Page
Loading...
