3-57
Algorithms and Parameters
PCM 81
Splice
This parameter allows you to change the amount of time used to
crossfade the splices that occur whenever pitch is shifted. A value
of 8ms is appropriate for most material. Higher values will produce
longer/smoother cross-fades, but the intelligibility of transients and
high frequency content may be affected. Lower values will
reproduce transients more accurately and have more high
frequency content, but the splices may be more audible.
Shift Row
Shift Cents
This parameter determines the amount of fixed shift for the stereo
input channels. The value is given in cents (1 cent=1/100th of a
semitone, 1200 cents/octave). The range is adjustable in
increments of a single cent. This value can be modulated
smoothly with patch sources to create vibrato and other
pitch-related special effects.
Shift Semitones
This parameter provides ±1 octave of pitch shift in half-step
(chromatic) intervals.
Note:
As the Cents and Semitones controls are additive, it is
possible to shift tones by as much as ±2 octaves.
To Next Page
Loading...
