4-32
Presets
Lexicon
PROGRAM BANK 5 (P5) (continued)
PADS & DRONES (continued)
3.2 Sweet Chorus ADJUST: Spd/Width 0–100
An LFO sine wave alternates detuning from positive to negative
pitch values. The pitch of both outputs is positive, then negative.
ADJUST changes both the speed and width of detuning
(faster=wider). Stereo In/Stereo Out.
3.3 MirrorChorus ADJUST: Speed 0–100
An LFO square wave alternates detuning from positive to negative
pitch values. The pitch shift of the left output is the opposite of the
right. Stereo In/Stereo Out.
3.4 LFO Detune ADJUST: Detune 0–100
A slow, chorusy detuner. Stereo In/Stereo Out.
3.5 SpatialDuck ADJUST: cents +/– 0–100
This preset produces a wash of detuned echoes with long reverb
decay. The reverb OutWidth is modulated to create spatial
movement. The entire effect is ducked by input level. (The reverb
and echo decays increase as the level fades.) ADJUST controls the
amount of detuning.
3.6 Vibrato BPM ADJUST: Depth 0–100
The vibrato produced by this effect is tempo controlled so it can be
synchronized to the beat. ADJUST sets the vibrato depth. Press Tap
twice to lock-in the tempo.
3.7 Verbato ADJUST: Depth 0–100
In this preset, a small stereo chamber reverb is routed through the
stereo pitch shifter. The pitch shifter is set to create vibrato. A nice
way to thicken up a track without messing with the dry sound.
UTILITY PROGRAMS
3.8 Stereo VSO ADJUST: Rvb Mix 0–100
Use this preset for pitch correcting stereo off-speed playback
material. Set the Varispeed parameter (in the first position of the
Soft row) to match the amount of varispeed used for playback.
ADJUST controls the amount of reverb added to the corrected
audio.
3.9 Mono VSO ADJUST: Rvb Mix 0–100
Use this preset for pitch correcting mono off-speed playback
material. Set the Varispeed parameter (in the first position of the
Soft row) to match the amount of varispeed used for playback
ADJUST controls the amount of reverb added to the corrected
audio.
PITCH CORRECT
WIth the exception of Demo Correct (4.9), all of the presets are
designed to accept a mono vocal track on either (or both) inputs.
Note also that , in each preset , the reverb is turned off and all pitch
parameters that are not patched can be found in the Soft Row.
To Next Page
Loading...
