4-12
Presets
Lexicon
PROGRAM BANK 1 (P1) (continued)
AMBIENCE EFFECTS
3.7 PhoneOrRoom? ADJUST: Pick One 0–1
Use ADJUST to choose between a mono telephone filter and a small
room with stereo ambience. The Soft Row provides access to the
filter controls as well as reverb design parameters.
3.8 CheapTV Room ADJUST: The Walls 1–10
This stereo preset simulates the sound of a Lo-Fi TV in a small room.
Use ADJUST to change the reflectivity of the walls. The Soft Row
provides access to filter controls and reverb design parameters.
3.9 Empty Stage ADJUST: Liveness 0–100
Made for creating live sounding spaces. ADJUST opens the space to
be more reflective and airy.
4.0 Tomb Room ADJUST: The Walls 1–10
Use this ambience preset to place source material within a very
reflective tomb. ADJUST moves the source deeper into this scary
space.
4.1 Comb Room ADJUST: Tone 0–100
This effect provides a tunable comb filter and reverb to produce a
highly colored ambience. Use ADJUST to change the tuning of the
comb filter.
4.2 Zoom Over ADJUST: Speed 1–25
Run an effect (or even a continuous synthesizer drone) into this
preset, and the sound will approach you from the center, spread
out to the sides as it passes overhead, and recede into the distance
behind you. ADJUST controls the speed of the fly-by. This effect will
image properly in either 2-channel or Surround mixes.
4.3 OneShotCarBy ADJUST: Speed 1–100
Input level triggers this left-to-right drive-by. When signal is
detected, it will move from left to right. Doppler pitch shift is
simulated as the image moves across the stereo field. Use ADJUST
to set the speed of the drive-by. Once audio has been detected, the
effect will cycle once. To drive by again, stop and restart the audio
track. To reverse the direction of the effect, set the Width
parameter to –45 — you’ll find it in the Soft Row.
4.4 AmbientCarBy ADJUST: Speed 1–100
This is a variation of OneShotCarBy. In this preset the effect is
enhanced with the addition of some stereo ambience. Also, in this
variation the effect repeats automatically. ADJUST controls the
speed of the drive-by.
4.5 HeadOn CarBy ADJUST: Speed 1–100
This preset uses less ambience than ZoomOver, and is more
appropriate for things that approach on the road than in the air.
ADJUST sets the speed of the effect. This effect will image properly
in either 2-channel or Surround mixes.
To Next Page
Loading...
