1-4
Getting Started
Lexicon
1. Headroom
Five-position indicator for analog and digital signal levels and
overload conditions.
2. INPUT
Adjusts analog input level.
3. Display
Two rows of 20 alphanumeric characters display effect names
and ID numbers, and parameter names and values.
4. ADJUST
In Edit mode, changes values of parameters chosen with
SELECT. With Program Banks or Register Banks selected,
behaves as a soft knob for patched parameters.
5. SELECT
Scrolls through presets, registers or parameters. With Program
Bank or Register Bank selected, scrolls through the 50
programs in the selected bank. With Edit selected, scrolls only
through the parameters of the active row.
6. Up/Down
Press to move up and down through a program, register, or
parameter matrix.
7. Program Banks
Enables selection of factory presets. Press repeatedly to cycle
selection of 4 internal preset banks. Press and hold to display
the name of the current bank.
8. Load/✱
In Program or Register mode, loads the selected program. In
Edit mode, scrolls through any multi-field parameter.
FRONT PANEL OVERVIEW
To Next Page
Loading...
